For models SuperNOVA1600 | 1300 | 1000 | 850 | 750 | 650 | 550 G2 ONLY
***Each cable now comes with three Ensourced 3D Printed Wire Wraps***
THESE CABLES ARE DIRECT REPLACEMENTS FOR THE LISTED POWER SUPPLIES AND ONLY WORK FOR THE LISTED POWER SUPPLIES
- I don’t need your stock cables
- You’re paying for a completely new modular cable
- I use high quality products (Connectors|Pins|Paracord|16 gauge wire)
- I can make the cable in ANY of my available colors
- You can choose as many colors as you want at NO EXTRA CHARGE
- I can arrange multiple colors in any pattern you want at NO EXTRA CHARGE
- I can make the cables shorter if you have a smaller build at NO EXTRA CHARGE
- I can make the cables longer if you have a bigger build but you need to contact me first
The order process for custom designed cables
This process allows for you to communicate your design idea to me without the need for emails back and forth. As always, if at ANY point you have ANY questions, click the Contact Me button at the bottom of the page. Lets get started!
Step 1: Choose what cable you want
To allow complete creativity, each cable type needs to be added to your cart seperately. If you want more than one cable made exactly the same you can just change the QTY to however many you need. Also. when you add a cable to your cart you won't have to leave the page to add a different cable. Just change the cable type, fill out the info for the cable, and hit add to cart. Wash, Rinse, Repeat!
Step 2: Choose the length of the cable
This allows you to have each cable made to a different length. Here you choose how long this cable is.
Step 3: Choose the Wire Wrap color for the cable
Included with each modular cable are three 3D Printed Wire Wraps. Wire Wraps were designed by me to help keep your cables neat and tidy after they are in your build. Check them out *"Here"*.
Step 4: Choose your sleeving colors
The first big step is to decide which of my available sleeving colors are going to be a part of your design. You can click *"Here"* to see what colors are available. Once you've decided on the colors you want to use, type the names in the provided box on my page.
Step 5: Show me the pattern
The last big step is making a representation of your design idea using the *"Sleeving Prototyper"* for me to work with. I'm a visual guy so this is WAY better for me than seeing your idea typed out. The most important thing I want you to remember during this part of the process is to not get too focused on the exact colors you use for your design inside the Sleeving Prototyper. You already picked your exact colors in the last step, this is only a representation of your design. Once you have a mock up of your design idea created within the Sleeving Prototyper, copy the unique link into the box provided on my page. You can make mock ups for multiple cable types at once using the Sleeving Prototyper and use the same link for other cables.
If you made it this far you are about to have the highest quality cable designed exactly how you want it and made especially for you. After you pay it'll be a few days for me to make it and most of the time I'll send you a photo before I ship them. If you have any questions at this point don't forget about the Contact Me button at the bottom of my site.